The Scepter
Stabilizer
Watch How to Install
the Scepter Stabilizer
↓
Personal Protective Equipment
Safety Glasses, Safety Gloves, Rubber Soled Work Boots, and Safety Vest
INSTALLATION
Step 1
Begin by inserting the bottom of your Scepter post into the opening on the Scepter Stabilizer Spike.
Step 2
Place the tip of the Scepter Stabilizer Spike in the desired location along your fence line.
Step 3a
Using a club hammer or install tool, drive your Scepter post into the ground just before the bottom hook reaches the ground.
Step 3b
Hook the desired Scepter fencing type to the Scepter Post and continue to drive the post into the ground until the bottom hook touches.
Removal
Step 1
Begin by detaching the selected Scepter fencing type from the Scepter posts and remove from the fence line.
Step 2a
Remove Scepter Posts from the ground using either the Scepter Post Puller or by hand.
Step 2b
If the Scepter Stabilizer Spike does not come out of the ground with the post, use the Stabilizer Spike ring Removal attachment for the post puller.
Step 3
Once removed, clean all dirt, sand, or debris from the Scepter Stabilizer Spike and store for the next use.
