The Scepter
Lumen
Watch How to Install
the Scepter Lumen
↓
Personal Protective Equipment
Safety Glasses, Safety Gloves, Rubber Soled Work Boots, and Safety Vest
Step 1
Begin by removing your Scepter Lumens from their box.
Step 2
Flip the Lumen over and flip the switch to the “ON” position.
Step 3
Remove the bottom ring from the Lumen unit and place over the cap of the Scepter post model you are using.
Step 4
Clip the Lumen unit to the cap of the Scepter post model you are using until you hear a click.
Step 5
Raise the ring and begin to screw to the bottom of the Lumen unit to lock into place. Be sure NOT to over tighten during this step.
